|
|
|
| Line continues to produce chips Incalfer |
|
Line continues to produce chips Incalfer.
Capacity: 300 Kg/h (finished product).
Composed by:
-primary screw-Feeder Used reviewed.
Receiving silo potatoes totally built in stainless steel 304.
Screw conveyor (helical) built in stainless steel material.
Gearmotor driven with power of 1/2 HP.
support Structure totally built in stainless steel 304 square pipes.
-Pelador (peeler) centrpifugo potatoes-Used revised.
Access and support structure with gutter potato power totally built in stainless steel square pipes.
Drum coated in abrasive material, with central axle fixed speed gearmotor driven, power 1/2 HP.
spout with hatch to the potato release, built in stainless material.
-continuous slices Washer-Used revised.
Washer tank totally built in stainless material, complete with drains and discharge valves and cleaning.
Drip mat washed potatoes balanced type, complete with brackets, gears and shafts made entirely in stainless material.
Drive: bike fixed speed reducer with .5 power HP.
-deep Fryer for sliced potatoes-Used revised.
Frying pan totally built in stainless steel plates supported by square tubing structure.
Containment system of the slices of potatoes formed by: single and double reverse blades, mat, totally built in stainless steel.
Drive: inverter variable speed reducer, electronic power 3/4 HP.
Hood for vapour withdrawal of frying, totally built in stainless material, with manual override for withdrawal, engaged the fireplace also in stainless steel.
Mat for continuous withdrawal of French fries, balanced type with traction chains coupled to the side, driven by mechanical back geared motor with variable speed by frequency, power electronic inverter .75 HP.
Disperser for flow Equalization of fat built in plates of stainless material.
Manual regulator valve grease flow coupled directly to the entrance of the deep Fryer pot.
-fat Recirculation pump-Used revised.
Recirculating pump centrifugal type high flow fat, fully built in cast iron, shaft seal by using graphited gasket, engine driven power 30 HP.
-continuous gas heat exchanger, 1.000.000 KCAL-near Mint.
Combustion chamber structure, fully built in square tubes and SAE 1020 carbon steel plates and 1045, isolated and externally coated in aluminum.
Internal recirculation and heating pipes, totally built in stainless steel special heat resistant according to DIN 2448.
Monoblock type burners, with total power of 1.000.000 kcal/h, adjusted and calibrated to work with LPG gas.
Combustion system with diameter 1/2 01:02 class 2 solenoid valves, solenoid valve and pilot 01 01 air filter
drive system with pilot and automatic ignition transformer, pressure switch to minimum pressure of air and gas.
-fat-Storage Tank again.
Built in stainless material, complete with electrical resistance for heating the stored fat. Interconnection between pipe and tank deep Fryer in stainless material.
-drying Mat-New.
Support structure built in folded stainless steel plates.
Hinged treadmill built in stainless material, powered by synchronized gear built in stainless material, and fixed speed gearmotor with .5 power HP.
2 centrifugal fans with powers of 3 and 5 HP coupled to distributors built in stainless material.
Lower suction mat system composed of nylon and collector Cyclone separator in stainless material.
-Aromatizer/feeder-New.
Collector funnel, support structure and transmission box made of stainless material, with electromechanical vibrator with power 1/12 HP.
slotted Cylinder feeder and feeder built in stainless material.
.5 HP power speed reducer with speed variation by electronic frequency inverter.
-vibratory Gutter for separation of fat-Used revised.
Splitter trough built in stainless material, complete with removable strainer for separation of excess fat.
Drive set formed by engine power 01 cv and eccentric double transmitter.
Vibratory system composed of springs of rubber and steel structure, Swiss technology.
Support structure built in square tubes of stainless material.
-cylinder aromatizer-Used revised.
Cylinder Diameter 750 mm x 1,600 aromatizer mm in length built in stainless material, complete with fins and helicoids for homogenization of the product.
Support structure built in square tubes of stainless material, complete with casters for moving the equipment.
Drive: speed power Gearmotor .5 HP.
|
Brand:
Incalfer
|
|
|
Main applications:
Food industry
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
Others suggested equipment for you:
|
|
 |
Brand: Incal
Coated tank for baking and processing of chocolate, creams and sweets.
Brand: Incal.
Model: JAA 22.
Material of equipment: Stainless steel.
Working Pressure: 150 LBS / Pol².
Capacity: 200 liters.
Voltage: 220 three-phase.
Compone... |
|
|
 |
Stainless steel rolling mill cylinder
Material of equipment: Stainless steel.
Voltage: 220 V three-phase.
Components: 1 motor of 1,5 KW of power.
General characteristics: It has height and temperature adjustment.... |
|
|
 |
Conveyor screw Stainless steel
- 5 meters long.
Measures:
- Diameter: 200 mm.
- Space between fins: 120 mm.
- Shaft diameter: 100 mm.
- Engine: 7.5 hp 1715 rpm.
- With motor and reducer.... |
|
|
 |
Brand: Mihama Seisakusho
Vacuum cooker for hard candies
Composed of cookers and vacuum.
Year: 2003.... |
|
|
 |
Brand: Hebleimar
Chocolate tray.
- Brand: Hebleimar.
- Model: HCH - 600.
- Voltage: 220V Three-phase;
- Components: 03 motors with respective powers: 2.1 KW, 1,5 KW, and
0.5 KW.
- Equipment characteristics: It has speed adjustment of the belt and t... |
|
|
 |
Brand: Fabrima, Masipack, Oystar
Components: Allen-Bradley, Altec, Festo, Rockwell, SEW
Machine: The Oystar Fabrima.
Year of manufacture: 2008.
Model: BP 5.
Vision system.
The PLC program is running normally.
Note: Video of binding machine, panel operation, bubble forming modules operation, aluminum film press, mat, coils... |
|
|
 |
Brand: Tirelli
Imported Italian bottling line, threading and labelling, consisting of:
-stainless steel pneumatic linear Tirelli Filling with 4 nozzles.
Model: GVJA.
-Rosqueadora stainless steel bottles, flasks for pneumatic Tirelli.
Model: NEBEL 2 t.... |
|
|
 |
Brand: Hebleimar
Extruder for cereal dough, sweets and consistent product.
- Brand: Hebleimar;
- Model: HEX - 400.
- Material: Stainless steel.
- Voltage: 220 V Three-phase.
- Components: 1 engine of 3.7 KW of power.
- General characteristics: It ha... |
|
|
 |
Brand: Rodighero
Floor type Bundling with sealing and tunnel trainer.
Rodighero
Manufacturer Machine automatic monoblock baler ER 400.
Used for beverages, foods and chemicals (for example: SOAP, detergent and paint);
cutting and automatic sealing System with ... |
|
|
 |
Brand: Hebleimar
Industrial cooling tunnel for chocolate, biscuit and sweets.
Length of 12 meters with 01 station.
Width: 600 mm.
Brand: Hebleimar.... |
|
|
 |
Brand: Donar, MVL
Components: WEG
With vibrating chute feeder for solid products.
Presence sensor for container packaging, moved by conveyor belt with talisca.
The equipment has two stainless steel silos, each silo has a scale/load cell and a CLP itself.
CLP brand GTA.
... |
|
|
 |
Components: SEW-Eurodrive
- Capacity: 2,000 L.
- Made of stainless steel.
- With complete panel:
- Siemens Logo 230 RC.
- Siemens switches.
- Organized picture.
- Inverter Sew Eurodrive Movitrac LT.
- System and pneumatic key.
- The mixer has two caps,... |
|
|
 |
Brand: Emblamaq
Flow Pack Wrapping Machine.
- Brand: Mult Pack 150.
- Voltage: 220V.
- With two engines with 1.5 kw each.
- Temperature adjustment on the jaws and lower release.
- Adjustment of the size of the packaging via format.
- Approximate sp... |
|
|
 |
Coated tank for melting of chocolate in stainless steel.
- It has 3 motors with power: 0,5 Kw, 1,5 Kw, 0,75 Kw.
- Equipment has temperature adjustment, transfer pump and mixer for
Homogenization.
- Capacity: 400 / 500 liters.... |
|
|
 |
Brand: Hebleimar
Cooling tunnel for chocolates, sweets, biscuits, cereal bars.
- Brand: Hebleimar
- Voltage: 220V Three-phase;
- Components: 04 motors with respective powers 5,0 KW, two
Engines with 1.5 KW and 0.75 Kw.
- General characteristics: It ha... |
|
|
 |
Brand: Geiger
Processor.
Brand: Geiger.
Model: Gum SK 44E.
Capacity: 44 liters.... |
|
|
 |
Ribbon Blender Mixer
- Conveyor thread attached.
- With reducer and motor.
Literature: Approximately 200 L.... |
|
|
 |
Brand: Emblamaq
Flow Pack packaging machine.
Brand: Mult Pack 150.
Voltage: 220v.
With two engines with 1.5 kW each.
Temperature regulation on the jaws and lower release.
Pack size adjustment via format.
Jaw width: 100 mm.
For product: 60 mm wid... |
|
|
 |
Brand: Hebleimar
Hebleimar stainless steel knife / knife roller
- Brand: Hebleimar
- Material: Stainless steel
- Voltage: 220 V three-phase
- Components: 1 engine generating 7.2 KW of power
- General characteristics: Spacing between 30 mm rotary knives... |
|
|
 |
Brand: Indumak
Line for mixing and packing with ribbon blender and Indumak floor:
-Packer/trademark Indumak package.
Model: MG1000.
Excellent state of conservation.
Packing type solder pad and FP 1000 feeder of Indumak, for the dosing of powders and c... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
|
 |
| |
|
Buy Line continues to produce chips Incalfer
