|
|
|
| Conveyor belt 45 ° |
|
Table 45° |
|
|
|
|
|
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
Others suggested equipment for you:
|
|
 |
Brand: Narita
- BOPP labeling machine, fed balel / roll roll, for pet bottles and smaller bottles.
- Brand: Natira.
- Model: MZ 200.
- Year: 2007.
- For BOPP labels.
- Capacity for 150 bottles / minutes for current format.
- Maximum capacity: 200... |
|
|
 |
Brand: Rodrinox
- Tank with a maximum capacity of 1000 liters.
- Brand: Rodrinox.
- Dimensions:
- 2.00 m high.
- 1,00 m in diameter
- 0,50 m support (feet).
- Material stainless steel 316
- With tapered bottom.
- Output of the lower part.... |
|
|
 |
Dryer Spray Dryer in stainless steel.
Drying capacity between 100 and 150 kg hour.
It has nozzle because it is high pressure.
It was used in the food industry.
Drying capacity between 100 and 150 kg hour.
Unbranded equipment was assemb... |
|
|
 |
Brand: Trox Technik
- Modular air handling unit.
- TKZ series.
- Brand: Trox Technik.
- Model: TKZ 03.
- Cooling capacity: 72,576 kcal / h
- Heat output: 30,100 kcal / h.
- Engine: 10,0 / 2 hp / poles.
- Year of manufacture: 2013.
- Degree of fil... |
|
|
 |
Brand: Alfa Laval
Alfa Laval sanitary transfer pump
- Pontecia: 7.5 hp - 3 phases.
- Voltage: 220/380 V.
- A 19.1 / 11.1
- Hz 60
- 3,500 rpm... |
|
|
 |
Stainless steel rolling mill cylinder
Material of equipment: Stainless steel.
Voltage: 220 V three-phase.
Components: 1 motor of 1,5 KW of power.
General characteristics: It has height and temperature adjustment.... |
|
|
 |
- Industrial conveyor belt.
- With motor and reducer.
- Flat canvas mat.
- 5 meters.... |
|
|
 |
Brand: Posimat
Positioner from plastic bottles.
Brand: Posimat.
Model: Master-20.
Serial: 8764-MXI.
Uses all kind of bottles either light or heavy, cylindrical, oval or asymmetrical, with short necks or even without a neck, as covers plans elements ... |
|
|
 |
Brand: Hebleimar
Hebleimar stainless steel knife / knife roller
- Brand: Hebleimar
- Material: Stainless steel
- Voltage: 220 V three-phase
- Components: 1 engine generating 7.2 KW of power
- General characteristics: Spacing between 30 mm rotary knives... |
|
|
 |
Brand: Incal
Coated tank for baking and processing of chocolate, creams and sweets.
Brand: Incal.
Model: JAA 22.
Material of equipment: Stainless steel.
Working Pressure: 150 LBS / Pol².
Capacity: 200 liters.
Voltage: 220 three-phase.
Compone... |
|
|
 |
Brand: Hebleimar
Extruder for cereal dough, sweets and consistent product.
- Brand: Hebleimar;
- Model: HEX - 400.
- Material: Stainless steel.
- Voltage: 220 V Three-phase.
- Components: 1 engine of 3.7 KW of power.
- General characteristics: It ha... |
|
|
 |
Brand: Implantação Engmaq
Stainless steel tank with serpentine.
Brand: Implantation Engmaq.
Capacity: 35 liters.
Area: 0,30 m2.
Pressure Design: Side / Serpentine - 3/5 Bar / man.
Design temperature: Side / Serpentine - 80/80 C.
Operating pressure: Side / Se... |
|
|
 |
Brand: Posimat
- Bottle positioning machine.
- Brand: Posimat.
- Model: Master 20.... |
|
|
 |
Brand: Fanem
- Fanem 345 climate chamber
- Stainless steel inner chamber
- Volume of 270 liters;
- Microprocessed control;
- Temperature: 10 ° to 75 ° C;
- Internal humidity controlled between 35% and 95%;
- Internal circulation of forced air;
... |
|
|
 |
Brand: Promaler
Intermittent rotary cellofanching machine.
Brand: Promaler.
Prepared to operate fully closed cartridges.
Tape application with the following dimensions: 36 mm wide x 15 mm deep x 67 mm high.
Machine can be formatted for cigarettes, haysta... |
|
|
 |
Brand: Jones
Press for SOAP formatting.
Brand: Jones (Ohio).
-capacity 160 units/minute.
-press Control Board.
-Motor and reducer.
-Burr cutter.
The machine works in a line of SOAP g. Mazzoni for approximately 1000 kg production time.
This equi... |
|
|
 |
Brand: Bray Controls, Flow Tec
- Flow control system.
- Double acting pneumatic actuator.
- Brand: Bray Controls.
- Maximum pressure: 140 psi.
- ISO 5211/1 compliance.
- Valve with ball ring.
- Brand: Flow Tec.
- Model: Flow-Tek F-15 4 "CF8M.
- Stainless st... |
|
|
 |
Brand: Berliner Luft
- Exhaust fan, ventilation unit with double exhaust fan.
- Brand: Berliner Luft.
- Series: BBT.
- Model: BBT 160.
- Quantity: One unit.
- Excellent condition.
Cli... |
|
|
 |
Automatic horizontal knife guillotine
Components: 02 motors generating 1.5 KW of power;
General characteristics: It has cutting adjustment of 80 to 100 mm.
It is part of an industrial line for the manufacture of cereal bars.... |
|
|
 |
Brand: Delbras
- No Break.
- Brand: Delbras.
- Model: PHD.
- Power: 06 KVA.
- 220 V input.
- Output 110 V + 110 V.
- Frequency 60 Hz.... |
|
|
|
|
Visitation: Schedule date for visitation and check equipment availability. Merely illustrative images.
|
|
|
| |
|
|
Photos and images sent by email will be considered as ad authorization on our websites and marketing.
Camargo Industrial has no responsability for the data delivered by the advertiser, (Operation, technical, maintenance, warranties, technical delivery) and registration of the same data, exempting Camargo Industrial responsibilities on the veracity of the information described, civil and criminally.
The advertiser declares that the equipment is their property, settled without alienation, pending fiscal or judicial attachment.
Standard Work Safety of Machines and Equipment (NR12): 12.1.1. Camargo Industrial does not participate in the use phase construction, transport, assembly, installation, adjustment, operation, cleaning, maintenance, inspection, decommissioning and dismantling of machinery or equipment, any such liability of the seller attributes and / or buyer, relieving - any responsibility Camargo Industrial.
|
 |
| |
|
Conveyor belt 45 °
